How To Paint A Rubber Mask

Download Commodity

Download Article

Painting latex tin can exist tricky, as regular paint may crack, ripple, or rub off of latex surfaces. First by mixing safe cement and a solvent like turpentine or mineral spirits together to create paint that volition adhere well to latex. You can employ a paint brush or an airbrush to utilise the paint, and then put on a sealer and so the latex is durable and looks swell. With the right approach and a fleck of creativity, yous tin paint a latex mask or prosthetic in no time.

1. 1

   Fix a workspace and wearable safety gear. Lay downwardly tarps or newspaper and arrange a work table where you tin can mix the paint. Wear gloves to protect your hands and ensure the space has good ventilation, such every bit open windows or an open garage door.^[1] You should also wearable a respiratory mask so you are protected from the paint fumes.

   • You should also wearable safety goggles to protect your eyes.

2. 2

   Use pigment formulated for latex for an like shooting fish in a barrel pick. If you do not want to have to mix your own paint, you can look for paint fabricated for use on latex at your local arts and crafts store or online. You lot can purchase the pigment in a variety of colors and shades.^[2]

   • The latex pigment volition probable contain a folder like rubber cement and a solvent also as pigment, which provides the colour. It is rubber to apply with a paint brush or an airbrush.
   • Paint for latex tin can exist expensive so you may opt for making your own if you are on a budget.

   Advertisement

3. 3

   Pour ⁱ⁄₂ cup (120 ml) of condom cement into a jar or cup. If y'all want to make your own paint, use safety cement, as information technology will act equally a binder and attach well to the latex. It is often sold in small and large cans.^[3]

   • You tin can become rubber cement at your local craft store or online.

4. iv

   Add ¹⁄₄ cup (59 ml) of turpentine or mineral spirits to the rubber cement. Utilize a plastic spoon to mix the rubber cement and solvent together. Make certain the cement is thin and runny.^[4]

   • Common pigment solvents like turpentine or mineral spirits tin can be found at your local craft shop or online. These solvents are very strong chemical so you should wear gloves when handling them.

5. 5

   Combine the mixture with 3 to four United states of america tbsp (44 to 59 ml) of oil-based paint. Put iii to 4 tablespoons (44 to 59 ml) of oil-based paint in a plastic cup with a broad rim. And then, pour 1 to two teaspoons (4.9 to 9.9 ml) of the prophylactic cement and solvent mixture into the oil-based paint. Use a spoon to mix the 2 together to form paint that will stick to the latex.^[5]

   • You tin and so go along the condom cement and solvent mixture on paw and add it to unlike oil-based pigment colors to create paint for latex. It should be stored in a absurd, dark place and should final for several weeks.

Advertisement

1. 1

   Connect the airbrush to a compressor at 60 psi. Airbrushing the paint onto the latex will ensure it appears even and smooth. Make sure the tip of the airbrush is make clean and dry. Adhere the dorsum connector in the airbrush to the hose that connects to the compressor.^[6]

   • Article of clothing respiratory equipment and gloves to protect yourself while using the airbrush.
   • You tin can hire an airbrush and a compressor from a hardware shop or buy them online.

2. two

   Cascade paint into the holder and attach it to the airbrush. Put 1 to 2 The states tbsp (15 to 30 ml) of paint (or the rubber cement, solvent, and oil-based pigment mixture) into the small cup or jar that comes with the airbrush. Slide the metal cap on the jar into the slot on the bottom of the airbrush. Brand sure the jar clicks into place so it is secure.^[vii]

3. 3

   Spray the paint onto the latex in a side to side motion. Turn the airbrush on and concur it ane to ii feet (0.30 to 0.61 m) higher up the latex. Spray the paint onto the latex, pressing down on the push on the airbrush in short bursts. Make sure the paint sprays out of the airbrush in a fluid, even motion. Move the airbrush dorsum and forth as you spray to cover the latex in 1 even layer of paint.^[8]

   • If you are painting a mask or a smaller item, you lot may find it easier to place it on a stand that spins so you can rotate the mask as you lot spray it with the paint.

4. 4

   Allow the pigment to dry for i-2 hours betwixt coats. Just apply 1 sparse layer at a time so the paint does not go clumpy. This will also ensure the colors practise non mix or blend together on the latex.

5. 5

   Clean the airbrush tip before switching colors. If you lot are planning to use several different colors to the latex, remove the paint holder from the airbrush. Place the airbrush tip into an airbrush cleaner. And then, press downwards on the push button on the airbrush a few times to cycle h2o through the castor and make clean information technology.^[9]

   • Rinse out the paint holder with warm water and soap to clean it as well and so you can use it again.
   • Almost airbrush kits will come with an airbrush cleaner, which is a big container filled with water with a metal tip that fits the airbrush tip. You lot tin can also hire an airbrush cleaner when you rent the airbrush as part of a kit.
   • If y'all do not accept access to an airbrush cleaner, yous tin can submerge the tip in a bowl of warm water. Pull and release the trigger on the airbrush a few times to circulate the water and clean the airbrush.^[10]

6. 6

   Add details to the latex using different colors. Utilise the airbrush to add details to the latex using different colors, such every bit reddish for the lips on a latex mask or beige for the skin on a latex prosthetic. You can too add together shading and dimension to the latex using darker shades of the same color.

Ad

1. 1

   Create a base with a lite coat of paint. Utilize the paint with a medium-sized paint castor (3 to 4 centimetres (1.2 to 1.vi in) wide) with flat, thick bristles. Glaze the latex item in a thin layer. Use a textile to wipe off any excess paint so the base color appears as a calorie-free wash on the latex.^[eleven]

   • Using a paint castor and wiping it off with a cloth allows the pigment to get into whatsoever cracks or crevices in the latex, such equally the details carved in a latex mask.

2. 2

   Allow the paint dry for one-2 hours between layers. Once you utilize a layer of color on the latex with the paint brush, give information technology time to dry. This volition ensure the pigment colors practice not blend or mix and that they have fourth dimension to adhere to the latex.

3. 3

   Use a pocket-size paint brush to outline fine lines and details on the latex. Go for a pigment castor that has a small head (1 to 2 centimetres (0.39 to 0.79 in) wide) and thick bristles to make applying the pigment easier. Outline fine lines on the face of a latex mask. Or, add fake bruises or cuts with the paint brush to a latex prop for a costume.^[12]

   • Work with the paint a piffling at a time to avoid creating a layer that is besides thick or clumpy.
   • Clean the paint brushes in a cup of h2o before switching colors.

4. 4

   Apply the paint with a sponge to add together texture and dimension. Apply small, clean paint sponges with rounded sides. Dip the sponge in the paint and dab it on the latex item on any spots that you want to appear rough, jagged, or raised. Layer the paint with the sponge for a rougher look or dab it on lightly to create dimension on the latex.^[thirteen]

   • Clean the sponges with h2o before switching colors, or use a unlike sponge for each color.

Ad

1. ane

   Avoid using a sealer if y'all used paint formulated for latex. Some paint fabricated for latex already contains a sealer in information technology. Check the label on the paint to see if in that location is sealer already information technology, and if this is the case, you do not demand to apply sealer to the paint.

   • For case, the pigment may say, "sealer included" or "sealer added" on the label to bespeak information technology already has sealer in it.

2. ii

   Apply a gloss rubber cement sealer for a shiny look. Wait for gloss sealer made for rubber cement at your local hardware store or online. Apply a minor paint brush with thick bristles to apply the sealer all over the latex in one even layer. Spread the sealer over the latex using smoothen, even strokes.^[xiv]

   • Use a paint brush that you do non plan to utilise again, such as a cheap decorating brush, as the sealer will stick to the beard and exist hard to remove.
   • The sealer will prevent the rubber cement from rubbing off and help it to dry properly.

3. 3

   Use a matte safe cement sealer for a less shiny look. If you lot desire the latex to appear less shiny, you tin employ a matte sealer made for rubber cement. Utilise the sealer with a paint castor in i even layer, spreading information technology using smooth, fifty-fifty strokes. A matte sealer may be ideal if you want the latex to look subtle and natural, rather than glossy.

   • A matte sealer can be constitute at your local hardware store or online.
   • Apply the matte sealer with a pigment castor that is inexpensive and disposable, such as an cheap decorating brush, as the sealer volition stick to the beard and exist hard to get out.

4. 4

   Allow the sealer to dry out for 12 hours. Make sure you exercise not impact or move the painted latex earlier it has time to dry properly.

Advertisement

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Things Yous'll Need

• Rubber cement
• Turpentine or mineral spirits
• Pigment for latex
• Oil-based paints

• Airbrush
• Compressor
• Airbrush cleaner

• Pigment Brushes
• Sponges
• Loving cup of water

• Prophylactic cement sealer
• Paint Brush
• Clean cloth

About This Article

Thank you to all authors for creating a page that has been read 39,525 times.

Did this commodity help you?

Source: https://www.wikihow.com/Paint-Latex

Share this post